|
Cyclades-PR3000 Router
|
The Cyclades-PR3000 combines the flexibility and power of
mid-range, chassis-based products with the cost-effectiveness
and simplicity of integrated routers. The PR3000 is
an expandable, rack-mountable box that delivers superior performance
and functionality you need. The powerful hardware
uses the latest in microprocessor technology, eliminating
performance bottlenecks found in other products. The PR3000
is equipped with a dual processor architecture based on a
50-MIPS MPC860 PowerPC CPU that provides raw processing
power never seen before in an integrated router.
Software features such as payload data-compression, load
balancing and dial-backup plus the wide range of supported
interfaces let you use the WAN infrastructure efficiently.
In addition, by routing IP, IPX and SNA, the Cyclades-PR3000
provides total connectivity, allowing networks to be consolidated
and minimizing management and communication costs.
The modular and expandable design can accommodate a variety
of LAN/WAN interface options, including Ethernet, integral
DSU/CSU for T1/E1, RS-232, V.35, X.21 and up to 64 RS232C
dial-up ports for remote access. You can install a combination
of interfaces as your network grows and replace them as the
technology or your needs change overtime.
The full-featured software handles all basic routing functions
and provides advanced security, management features, and transparent
interoperability with your current network. The exceptional
Cyclades service and support complete the package to make
the Cyclades-PR3000 the ideal router for your network.
Applications:
Internet/ Intranet Connectivity
Corporate Networks
LAN-to-LAN Connectivity
IP, SNA and IPX Integration
Remote Access
|
Key Features:
Dual-processor architecture to boost routing
performance
Integrates and consolidates IP, IPX, and
SNA Networks
Compact, rack-mountable and expandable
design
Up to 3 simultaneous high-speed WAN connections
Terminal Server functionality with up
to 64 dial-up lines
SNMP, Packet Filtering, and NAT for Security
and IP Management
OSPF and RIP
|
For more information, please email your Sales Representative
at sales@yudhawira.co.id.
|
The Cyclades-PR3000 can be used to link the central office
and several braches in a enterprise-wide network using point-to-point
connections (leased lines, dial-up) or switched networks (Frame-relay
or X.25, for example). Small- to medium-sized companies can
even use the PR3000 as the main backbone router.
The Cyclades-PR3000Ős flexibility, reliability and cost-effectiveness
are ideal for ISPs connecting remote Point-of-Presence or
corporate customers. Different combinations of T1/E1 and dial-up
lines are supported in one box. Mediium and small ISPs using
T1/E1 up-link connections to the Internet can also use the
Cyclades-PR3000 as the main router.
|
The Cyclades-PR3000 is a high-performance, flexible, mid-range
router that combines the performance and flexibility of mid-range,
chassis-based products with the simplicity and cost-effectiveness
of integrated routers.
It offers the flexibility of a highly modular design and the
high-performance of the PowerPC dual-processor architecture.
The WAN options include, besides traditional serial and T1/E1
interfaces, and dial-up serial ports. Up to three simultaneous
high-speed WAN connections are supported.
Other integrated routers normally use one single processor to
handle the interfaces and the routing protocols. That imposes
compromises in performance that limit the network throughput
and generates inefficient use of the communication infrastructure.
The PR3000 uses the latest in microprocessor technology to eliminate
the performance bottlenecks and unnecessary latencies. With
its dual-processor architecture (an advanced Power PC CPU
for protocols and an additional 32-bit RISC CPU for I/O) and
optimized hardware design, the PR3000 has spare raw power to
handle all the network interfaces at maximum speed. The
spare performance, flexible expansion slots and the capacity
to accommodate up to 64 MB of RAM assure that the PR3000 is
not only prepared for the demands of your network today, but
also ready for the increased demands of the future
The PR3000 offers a full set of software features to satisfy
all your needs. It runs the Cyclades Routing Operating
System (CyROS). This software incorporates all the internetworking
expertise and experience accumulated by Cyclades along the years.
It is a proven software platform that allows the introduction
of new features and products while maintaining stability, reliability
and robustness. It also provides interoperability, connectivity,
security and consistent interfaces across the product line. |
|
The PR3000 supports:
Up to THREE interfaces per PR3000 unit.
ANY combination of Serial WAN (SWAN)
and T1/E1 interfaces.
ONE Z-Bus/TS interface (64 dialup ports)
on slot 1.
|
|
The Cyclades-PR3000 supports IP and IPX. These network protocols
can be routed over PPP, Frame Relay, and X.25 links over dial-up
lines, leased lines, and switched networks. Both RIP and OSPF
routing protocols are supported. This way, the PR3000 can integrate
and consolidate your network, minimizing management and communication
costs.
Besides being a full-featured router, the PR3000 can also act
as a Remote Access Server with the installation of an expansion
card(Z-Bus Interface Card) and external Serial Expanders for
up to 64 RS-232 dial-up ports per PR3000 unit.
Security is an important concern, especially when the corporate
network is connected to the Internet. Complete support for
packet and service filtering and authentication protocols
such as PAP, CHAP, RADIUS, and TACACS help to keep your network
secure.
Features such as payload data compression, loading balance,
dial-on-demand routing, dial-backup and load backup allow efficient
use of the WAN infrastructure, minimizing communication costs
and keeping network integrity. Network Address Translation (NAT)
helps you to manage IP addresses. Because the PR3000 is
standard based and because it was tested for compatibility with
equipment from all major vendors, you can rest assured that
it inter-operates and seamlessly integrates in your existing
network.
Performance and flexibility are normally associated with
large boxes, high cost and complexity. The PR3000, while offering
unrivaled performance in its class with all the functionality
and flexibility you need, is compact, simple and easy to configure
and manage. It has a dedicated console port for initial
configuration. After the router is operational, the configuration
and management can be done locally at the console or from
any point in the network. You can use a command line file
to configure the PR3000 if you prefer, but you don't have
to. A simple and intuitive menu-driven interface is also available.
Full SNMP support, telnet server, configuration upload/download,
command line parser, Network Address Translation (NAT), flash-memory
software upgrades, on-line/off-line configuration, watchdog
timer, tracing and debug functions are examples of features
that makes management and administration a breeze.
|
Hardware |
CPU |
: |
MPC860 at 40MHz (PowerPC in
a dual CPU configuration) |
Memory |
: |
8MB basic configuration, expandable
up to 64MB. |
Flash CPU |
: |
4MB basic configuration |
External Interfaces |
LAN |
: |
1 built-in Ethernet 10BT LAN Interface,
1 Internal Expandsion Slot for future HW upgrade,
3 Expandsion Slots for WAN Interfaces.
|
WAN |
: |
Serial (RS232, V.35, X21),
T1/E1, Z-Bus (up to 64 RS232 Dial-up serial ports). |
Console |
: |
1 DTE RS-232 on RJ-45 for backup/dialup
1 dedicated RS-232 console port |
Software Protocols |
: |
Frame Relay, PPP
and X.25 data link protocols, IP and IPX network protocols,
RIP-1, RIP-2 and OSPF routing protocols,
ICMP, SNMP, TCP, UDP, DNS, NAT, TCP, BOOTP, TFTP, FTP,
Telnet, RADIUS, TACACS, PAP, CHAP, Dial-in, Dial-out
|
Power and Environmental |
Dimensions (WxDxH) |
: |
17 inches (W), 8.5 inches (D), 1.75 inches
(H) |
Power |
: |
Internal power supply 100-200VAC (auto-ranging),
40W max. |
Operating Temperature |
: |
32F to 112F (0 to 44 Celsius) |
Weight |
: |
1.2 KG (2.6 pounds) base unit |
Certification |
: |
FCC Class A and CE tested |
|
|
|
|